OS/2 Warp Connect 3.x Workstation
                                                                    v3.00

IBM OS/2* Warp Connect Workstation Installation Notes for Intel's
EtherExpress(TM) PRO/10 ISA LAN Adapter
=================================================================

Location of Driver: \NDIS\EPRO.OS2


NEW INSTALLATION
----------------

1  Install OS/2 Warp as instructed in the IBM installation guide.

2  When prompted to Install Network Support, select Yes.

3  In the IBM Peer for OS/2 window, select Yes, install OS/2 Peer.

4  Enter a Unique workstation name and description when prompted.

5  Enter the name of your existing Domain when prompted. If you do not
   have an existing domain name to use, use the default IBMPEERS.

6  In the Novell NetWare Client for OS/2 window, select Yes, if your
   workstation is on a Novell NetWare network.

7  In the Access Internet with Modem window, select No.

8  In the Select Network Adapter Window, select Other Adapter.

9  When prompted for the driver, insert the EtherExpress PRO/10 ISA
   driver disk and specify the path as A:\NDIS. OS/2 Warp will then copy
   the driver and add it to the LAN adapter list.

10 From the LAN adapter list, select the EtherExpress PRO/10 ISA and
   click ADD.

11 Follow through the rest of the OS/2 Warp installation as instructed in
   the IBM installation guide.


OS/2 WARP IS ALREADY INSTALLED
------------------------------

1  Double-click the MPTS Icon in the OS/2 WARP main program group.

2  From the Multi-protocol Transport Service window, select Configure.

3  From the Configure window, select LAN adapters and protocols and click
   on Configure.

4  From the LAPS Configuration window, remove the existing installed LAN
   adapters and protocols.
      
      Note: you must remove the protocols before you can remove the LAN
            adapter.

5  After the LAN adapter and protocols have been removed, select Other
   Adapters.

6  When prompted for the driver, insert the insert the EtherExpress
   PRO/10 ISA driver disk and specify the path as A:\NDIS. OS/2 Warp will
   then copy the driver and add it to the LAN adapter list.

7  From the LAN adapter list, select EtherExpress PRO/10 ISA.

8  Select the protocols being used on your network, and click Add. The
   default protocol used by OS/2 Warp is IBM OS/2 NETBIOS. Also, if you
   need support for Novell Netware, add IBM NetWare Requester Support for
   OS/2. If you need TCP/IP support add IBM TCP/IP.

9  After the LAN adapter and protocols have been configured, select OK to
   exit.

10 From the Configure window, select Close.

11 From the Multi-protocol Transport Service window, select Exit.

12 When prompted to modify CONFIG.SYS, select Exit to have OS/2 Warp make
   the modifications for you.

13 Shut-down OS/2 Warp, and reboot for the changes to take effect.





*  Third-party trademarks are the property of their respective owners.